QSP | | |
|
| |
| Torque wrench for single purpose bolt tightening. | |
| | |
| Application- For assembly and mass production.
Features- Preset type
- QSP has no graduations. Torque is set internally along with a torque tester. Workers can not change torque setting so there can be no accidental change while in use.
- During measurement application a "click" will sound when set torque value has been attained.
- The ratchet head features 24 teeth accurately ground to provide durability and creates movement at 15 degree intervals which allows for gear ease of tightening in confined apaces.
- Resin grip provides easy operation and user comfort. (Only models QSP25N~QSP140N, other models with knurled grip.)
- Since new mechanism, no need to lock after torque setting. There is no more "END Cap"
| |
| Accuracy ±3% | |
| Model | Torque Range | Hand Force at Max Torque Range | Effective Lgth. | Overall Lgth. | Square Drive | Weight approx. | S.I. /Metric | Min.-Max. | S.I. | Metric | | N | lb. | mm | in. | mm | in. | mm | in. | kg | lb. | QSP1.5N | N.m 0.5-1.5 | kgf.cm 5-15 | | 12.5 | 2 1/8 | 120 | 4 23/32 | 165 | 6 1/2 | 6.35 | 1/4 | 0.1 | 1/4 | QSP3N | 1-3 | 10-30 | | 25 | 6 3/8 | QSP6N | 2-6 | 20-60 | | 50 | 10 19/32 | QSP12N | 4-12 | 40-120 | | 96 | 20 7/16 | 125 | 4 29/32 | 175 | 6 15/16 | 0.15 | 11/32 | QSP200I-2A | 5-25 | 50-250 | | 161 | 32 13/16 | 155 | 6 3/32 | 215 | 8 3/8 | 0.2 | 7/16 | QSP25N3 | 9.53 | 3/8 | QSP50N3 | 10-50 | 100-500 | | 279 | 56 21/32 | 179 | 7 1/16 | 250 | 9 3/4 | 0.4 | 7/8 | QSP750I-3A3 | 20-100 | 200-1000 | | 389 | 74 5/16 | 257 | 10 3/32 | 330 | 13 | 0.65 | 1 13/32 | QSP100N3 | 12.7 | 1/2 | QSP140N3 | 40-140 | 300-1400 | | 444 | 96 3/4 | 315 | 12 13/32 | 385 | 15 3/16 | 0.7 | 1 5/8 | QSP200N3 | 40-200 | 400-2000 | | 500 | 101 19/32 | 400 | 15 3/4 | 470 | 18 1/2 | 1.2 | 2 5/8 | QSP280N3 | 40-280 | kgf.m 4-28 | | 467 | 127 | 600 | 23 5/8 | 670 | 26 3/8 | 19.05 | 3/4 | 1.8 | 4 | QSP420N | 60-420 | 6-42 | | 101 19/32 | 900 | 35 7/16 | 970 | 38 3/16 | 3.1 | 6 27/32 |
| |
| Additional models are available. | |
| | |
| 1. Adjusting tools for QSP and QSP3 are different. Conventional type adjusting tool for QSP cannot be used for QSP3. 2. Not for inspection purpose. 3. A torque wrench tester is necessary for torque setting. Please specify required set torque when you order. | |
|
|