或者

广州得肯电子有限公司

检测认证人脉交流通讯录

高精度差分探头PT-8010

  • 这真不是您需要的产品?
  • 品  牌:
  • 主要规格:
  • 202*83*38
  • 用  途:
  • 测量
    • 规格 频宽 70MHz 误差 ±2% 输入阻抗 10MΩ//7 p F each side ground 输入电压 -Swing(into 50 KΩ load) ±7V -Offset(typical) <±5mV -杂讯(typical) 0.9 mV rms -输入阻抗(typical) 50Ω 共模互斥比CARR(typical) -80dB @50Hz;-60d B@1MHz 供应电源 -内置 4×AA cells or 6V DC/70m A mains adaptor or regulated 9V DC/120m A mains adaptor -外接 power leads BNC长度 90cm 测试线长度 60cm 重量 500g 尺寸(L×W×H) 202mm×83mm×38mm 型号 PT-8010 PT-8020 衰减比例 1:100/1000 1:200/2000 最大输入差分电压 (DC+ Peak AC) ±700V@1/100 ±7000V@1/1000 ±1400@1/200 ±14000@1/2000 最大输入与地电位差 (DC+Peak AC) ±7000V@1/100& 1/1000 ±7000V@1/200 & 1/2000 共模互斥比(CMRR) 2500V rms CAT Ⅲ 2500V rms CAT Ⅲ Specifications Bandwidth 70MHz Accuracy ±2% Input Impedance 10KΩ//7 p F each side ground Output Voltage -Swing(into 50 KΩ load) ±7V -Offset(typical) <±5mV -Noise(typical) 0.9 mV rms -Source Impedance(typical) 50Ω CARR(typical) -80dB @50Hz;-60d B@1MHz Power Requirements -Standard 4×AA cells or 6V DC/70m A mains adaptor or regulated 9V DC/120m A mains adaptor -Options power leads Length of BNC Lead 90cm Length of Input Leads 60cm Weighr 500g Dimension(L×W×H) 202mm×83mm×38mm Specifications PT-8010 PT-8020 Attenuation Ratio 1:100/1000 1:200/2000 Differential Input Voltage (DC+ Peak AC) ±700V@1/100 ±7000V@1/1000 ±1400@1/200 ±14000@1/2000 Common Mode Voltage (DC+Peak AC) ±7000V@1/100& 1/1000 ±7000V@1/200 & 1/2000 Absolute Max .Input (Each side to ground) 2500V rms CAT Ⅲ 2500V rms CAT Ⅲ Features: •Up to ±1400V(DC+Peak AC) Differential •Bandwidth up to 70MHz •Safety Certified •Overrange Indicator Applicstions: •High Voltage Floating Measurement •Voltage Surge Measurement •Power Electronics System Design
    广州得肯电子有限公司

    袁票

    • [联系时请说明来自检测通]
    • 联系方式:
    • 请点击查看电话

    • 地址:
    • 广州市光谱西路69号TCL文化产业园二期413-416

    • 检测通手机版

    • 检测通官方微信

    •  检测通QQ群