这真不是您需要的服务?
EN 13163 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification 建筑绝热产品-工厂生产发泡聚乙烯产品-规范 |
|||||
Clause 条款 |
Test Item 测试项目 |
Test Method 测试方法 |
Sample Requirement 样本要求 |
TAT 测试周期 |
Remark 备注 |
4.2 | For all applications 通用要求 | ||||
4.2.1 | Thermal resistance and thermal conductivity(10±0.3℃) | EN 12667(thin) | 300x300x5~80mm, 2pcs | 7 | |
热阻和导热系数(10±0.3℃) | EN 12939(thick) | ||||
4.2.2 | Length and width 长度和宽度 |
EN 822 | Full size, 5pcs | 7 | |
4.2.3 | Thickness 厚度 |
EN 823 | Full size roll:5pcs board and batt: 5pcs |
||
4.2.4 | Squareness 垂直度 |
EN 824 | Full size, 5pcs | ||
4.2.5 | Flatness 平整度 |
EN 825 | Full size, 5pcs | ||
4.2.6 | Recation to fire 与火反应 |
EN 13501-1 EN 15715 |
According to class | 20 | 安装按照EN 15715 |
4.3 | For specific applications 特定要求 | ||||
4.3.2 | Dimensional stability 尺寸稳定性 |
EN 1603 method B1 | 500×500mm,3pcs | 25 | 根据测试条件选择测试标准; |
EN 1604 | 200×200mm, 3pcs每个条件 | 10 | 当测DS(70,90)时,可不测DS(70,-)和DS(23,90) | ||
4.3.3 | Squareness 垂直度 |
EN 824 | Full size, 5pcs | 7 | |
4.3.4 | Compressive stress at 10% deformation 10%变形时压缩应力 |
EN 826 | 厚度<50mm时,50×50mm, 5pcs 厚度≥50mm时,100×100mm, 3pcs or 150×150mm, 3pcs or 200×200mm, 3pcs |
7 | |
4.3.5 | Bending strength 弯曲强度 |
EN 12089 Method B | 厚度<50mm时:(5×厚度+50)×150×厚度mm,3pcs; 厚度≥50mm时:300×150×50mm,3pcs |
7 | |
4.3.6 | Tensile strength perpendicular to faces 垂直于表面的拉伸强度 |
EN 1607 | 厚度<50mm时,50×50mm, 5pcs 厚度≥50mm时,100×100mm, 3pcs |
7 | |
4.3.7 | Deformation under specific compressive load and temperature conditions 特定的温度条件和压缩载荷下的变形 |
EN 1605 | 厚度<50mm时,50×50mm, 5pcs 厚度≥50mm时,100×100mm, 3pcs or 150×150mm, 3pcs or 200×200mm, 3pcs |
12 | |
4.3.8 | Compressive creep 压缩蠕变 |
EN 1606 | 厚度<50mm时,50×50mm, 2pcs | 95 225 450 |
曝露时间10/25/50年,测试时间至少122/304/608d |
4.3.9 | Shear strength 剪切强度 |
EN 12090 | 250×50mm, 厚度≤50mm, 5pcs | 10 | 单试件法 |
200×50mm, 厚度≤50mm, 6pcs | 10 | 双试件法 | |||
4.3.10 | Cyclic loading behavior 循环载荷测试 |
EN 13793 | 150×150mm×d, 1pc | ||
4.3.11.1 |
|