检测认证人脉交流通讯录
EN 14766
这真不是您需要的服务？
-
对应法规：
CNAS认可项目： - Test item 测试名称: 山地自行车 Mountain-bicyclesTest info 测试内容：
4.2 Sharp edges 利边 4.3 Security and strength of safety-related fasteners 安全紧固件强度测试 4.4 Crack detection methods 裂缝探测方法 4.5 Protrusions 突出物 4.6 Brakes 刹车 4.7 Steering 操纵系统 4.7.1 Handlebar - Dimensions尺寸 4.7.2 Handlebar grips and plugs 车把手握把和插销 4.7.3 Handlebar stem -insertion-depth mark or positive stop车把手立管插入深度标记 4.7.4 Handlebar stem -extension to fork-stem-clamping requirements车把手立管延伸处装夹要求 4.7.5 Steering stability 操纵稳定性 4.7.6 Steering assembly-Static strength and security tests 静态强度及牢固性 4.7.7 Handlebar and stem assembly - Fatigue test 把手及立管疲勞 4.8 Frame 车架 4.8.1 Suspension frame - Special requirements 特殊要求 4.8.2 Impact test (Falling mass) 冲击测试 4.8.3 Frame-Fatigue test with pedalling forces 车架动态摇摆 4.8.4 Frame-Fatigue test with a vertical force 垂直力疲劳 4.9 Front fork 前叉 4.9.1 General 一般要求 4.9.2 Means of location of the axle 前叉轴之要求 4.9.3 Suspension fork - Special requirements 特殊要求 4.9.4 Front fork - Static bending test 静态弯曲测试 4.9.5 Front fork - Rearward impact test 向后冲击测试 4.9.6 Front fork - Bending fatigue test 弯曲疲劳测试 4.9.7 Forks intended for use with hub - or disc brakes 使用於花鼓或碟式煞車之前叉 4.1 Wheels and Wheel/tyre assembly轮子 4.10.1 Rotational accuracy 真圆度 4.10.2 Wheel/tyre assembly - Clearance 轮子间隙 4.10.3 Wheels - Static strength test 轮子静态强度测试 4.10.4 Wheels - Wheel retention 轮子保持力测试 4.10.5 Wheels - Quick release mechanisms 快卸机构 4.11 Rims , Tyres and tubes 轮缘, 轮胎 4.12 Mudguards 挡泥板 4.13 Pedals and pedal/crank drive system 踏板和曲柄 4.13.1 Pedal tread 踏板面 4.13.2 Pedal clearance 踏板间隙 4.13.3 Pedal/pedal spindle assembly - Static strength test 踏板/踏板轴组件 - 静态强度 4.13.4 Pedal spindle - Impact test 踏板轴冲击 4.13.5 Pedal/pedal spindle - Dynamic durability test 踏板/踏板轴组件 -动态疲劳测试 4.13.6 Drive system - Static strenght test 传动系统强度 4.13.7 Crank assembly - Fatigue test 曲柄组疲劳测试 4.14 Saddles and seat-pillars 座垫和座垫轴 4.14.1 General 一般要求 4.14.2 Limiting dimensions 尺寸 4.14.3 Seat pillar insertion mark 座垫轴插入深度记号 4.14.4 Saddle/seat pillar - Security test 座垫和座垫轴强度 4.14.5 Saddle - Static strength test 座垫轴静态强度 4.14.6 Saddle and seat-pillar clamp-Fatigue test座垫及座杆疲劳测试 4.14.7 Seat pillar - Fatigue test 座垫轴疲劳测试 4.15 Drive-chain 传动链条 4.16 Chainguard 链条盖 4.17 Spoke connector 轮辐连接器 4.18 Luggage carriers 行李架 4.19 Handling and operation of a fully-assembled bicycle 路况测试 4.2 Lighting systems and reflectors照明系统及反射镜 4.21 Warning device报警装置 5 Instructions 说明书 6 Marking 标签 Informative items Annex B Steering geometry 掌舵部分几何图 Annex C Structural intergrity of the fully assemblyed bicycle整车综合强度测试 Annex D Wheel/tyre assembly - Fatigue test 轮子轮胎疲劳测试 Lead time 测试周期: 常规 Regular service 25 working daysSample size 送样规格:2 sets of completed products2 pcs of front fork2 pcs of frame & fork assembly3 pcs of chain3 pcs of handlebar and stem1 pcs of saddle & saddle pillar assemble1 pcs of saddle pillar1 pcs of chainwheel and crank assembly1 pcs of pedal.全套样品2套前叉2套，车架前叉组两件，传动链条3条，把手组3套，鞍座座杆组件1套，座杆1件，链盘曲柄组各一件，脚踏一件Others 其他信息：Sample report 报告样本：
