或者

通标标准技术服务有限公司深圳分公司

检测认证人脉交流通讯录
  • 深圳SGS提供餐具用不锈钢材料测试服务

  • 这真不是您需要的服务?

     直接提问 | 回首页搜

  • 对应法规:GB/T 15067 不锈钢餐具 ISO 8442不锈钢和镀银餐具 技术条件
    CNAS认可项目:是
  • 深圳SGS提供餐具用不锈钢材料测试服务 SGS Provide Stainless Steel for Tableware Performance Test Service

    Key Words: 不锈钢成分测试,304不锈钢测试,不锈钢餐具测试,不锈钢硬度测试
    不锈钢尤其是奥氏体不锈钢具有较好的耐腐蚀性,被广泛使用于食具容器、食品生产经营用工具、设备等食品相关产品。SGS深圳材料实验室从材料源头上为您保驾护航,针对厨具、炊具、餐具、饮具使用的不锈钢及涂镀层提供专业的检测服务。可以根据QB/T 1622、GB/T 15067、QB/T 2174等进行材料和产品测试,根据LFGB,EU,GB, ITALY,FRENCH ,FDA,JAPAN要求进行食品级测试。

     

    测试标准:
    GB/T 15067 不锈钢餐具
    ISO 8442不锈钢和镀银餐具 技术条件

     

    Test Standard:
    GB/T 15067 Stainless steel cutlery 
    ISO 8442 Materials and articles in contact with foodstuffs - Cutlery and table holloware

     

    测试项目:

    成分分析&牌号鉴定:ASTM E1086,GB/T 11170,JIS G1253
    盐雾测试:ASTM B117,ISO 9227,GB/T 10125
    晶间腐蚀试验:草酸电解浸蚀组织分级试验(ASTM A262及GB/T 4334 方法A ),不锈钢硫酸-硫酸铁腐蚀试验(ASTM A262及GB/T 4334 方法B), 不锈钢65%硝酸腐蚀试验 (ASTM A262及GB/T 4334 方法C), 不锈钢硫酸-硫酸铜腐蚀试验(ASTM A262及GB/T 4334 方法E).
    耐点腐蚀和缝隙腐蚀:FeCl3点蚀测试ASTM G48方法A
    金相分析:GB/T 6394,ASTM E112, GB/T13305 ,ASTM E562。
    拉伸试验:ASTM E8/E8M,GB/T 228.1,ISO 6892-1,JIS Z2241,ASTM A370。
    弯曲试验:GB/T 232,ISO 7438,ASTM E290,JIS Z 2248。
    冲击试验:GB/T 229,ISO 148-1,JIS Z2242,ASTM E2。
    扩口测试:GB/T 242,EN ISO 8493;
    卷边试验:GB/T 245, EN ISO 8494;
    压扁试验:DIN EN ISO 8492,GB/T 246。
    硬度测试:GB/T 4340.1,ISO 6507, ASTM E384,ASTM E92
    涂镀层厚度及均匀性:ASTM B487, GB/T 6462,ISO 1463,AS 1231
    涂镀层成分:X射线光电子能谱仪(XPS)GB/T 19500,X射线能谱仪(EDS)GB/T16594。

    Test Items:

    Component analysis: ASTM E1086,GB/T 11170,JIS G1253

    Salt spray test ASTM B117,ISO 9227,GB/T 10125

    Intergranular attack test:Oxalic acid etch test for

    Component analysis: ASTM E1086,GB/T 11170,JIS G1253
    Salt spray test: ASTM B117,ISO 9227,GB/T 10125
    Intergranular attack test:Oxalic acid etch test for classification of etch structures(ASTM A262 / GB/T4334 Method A ), Ferric sulfate-sulfuric acid test(ASTM A262 / GB/T4334 Method B), 65%Nitric acid test(ASTM A262 / GB/T4334 Method C), Copper-copper sulfate-16% sulfuric acid test(ASTM A262 / GB/T4334 Method E)。
    Pitting and Crevice Corrosion Resistance:Ferric Chloride Pitting Test [ASTM G48 Method A]
    Metallographic analysis:GB/T 6394,ASTM E112, GB/T13305 ,ASTM E562。
    Tensile test: ASTM E8/E8M,GB/T 228.1,ISO 6892-1,JIS Z2241,ASTM A370。
    Bend test: GB/T 232,ISO 7438,ASTM E290,JIS Z 2248。
    Impact test: GB/T 229,ISO 148-1,JIS Z2242,ASTM E23。
    Flaring  test:GB/T 242,EN ISO 8493;
    Flange test :GB/T 245, EN ISO 8494;
    Flattening test :DIN EN ISO 8492,GB/T 246。
    Hardness Test:GB/T 4340.1,ISO 6507, ASTM E384,ASTM E92
    Coating thickness and uniformity:ASTM B487, GB/T 6462,ISO 1463,AS 1231
    Coating composition: XPS:GB/T 19500, EDS:GB/T16594


  • 检测通手机版

  • 检测通官方微信

  •  检测通QQ群