SGS ASTM C610膨胀珍珠岩模制板状和管状绝热材料测试服务

SGS  ASTM C610 molded expanded perlite block and pipe thermal insulationTesting Services

Key words: ASTM C610, block, expanded perlite, fittings; molded; pipe, thermal Insulation, thermal conductivity, 膨胀珍珠岩, 模制板, 导热系数,热阻, 热阻测试, 隔热, 绝热, 保温, 绝热材料, SGS测试

膨胀珍珠岩模制板、配件、管件绝热材料的主成分通常是膨胀珍珠岩、硅酸盐粘合剂，可能还含有纤维增强材料。

ASTM C610-15 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation¹

ASTM C610-15 膨胀珍珠岩模制板状和管状绝热材料标准规范¹

此规范涵盖使用表面温度在80至1200华氏度（27℃至649℃）的膨胀珍珠岩模制板状、配件、管状绝热材料。

ASTM C610-15标准规范中物理性能测试要求及测试标准如下：

ASTM C610   Dimensional tolerances尺寸偏差

ASTM C585   Inner diameter & Outer diameter内径外径

ASTM C303   Density of Block insulation 板状密度

ASTM C302 Procedure A   Pipe insulation 管状密度

ASTM C1045 ASTM C177   block insulation板状导热系数

ASTM C335   Apparent thermal conductivity of  Pipe insulation 管状导热系数

ASTM C356   Linear shrinkage after heat soaking(649℃)线性收缩

ASTM C203 method 1(3 point),procedure D   Flexural strength(Block insulation only)弯曲强度(板状)

ASTM C165 procedure A   Compressive resistance(Block insulation only) 抗压强度(板状)

ASTM C421   Mass loss by tumbling after 10 minutes   10分钟翻转损失

ASTM C1616   Moisture content含水率

ASTM C610   Water absorption after heat aging热老化后吸水率

ASTM E84   Surface burning characteristics表面燃烧特性

ASTM C411   Hot-surface performance热面性能(649℃)

ASTM C795   Stress corrosion cracking of austenitic stainless steel应力腐蚀性能

ASTM E136   Non-combustible不燃性

SGS提供上述方法的检测服务，详情请咨询SGS:

联系人：张先生

电话： 13806041987

E-Mail: caden.zhang@sgs.com