或者

上海标检产品检测有限公司

检测认证人脉交流通讯录
  • 中国皮革检测方法标准与国际同类标准的差异

  • 这真不是您需要的服务?

     直接提问 | 回首页搜

  • 中国皮革检测方法标准与国际同类标准的差异 检测方法标准是皮革各项性能指标检测的依据,检测方法标准是否先进,直接影响到皮革性能检测结果的公正和被认可性。中国是皮革大国,标准化工作对促进中国皮革质量的提高,规范中国皮革行业的发展具有很重要的作用,国家和行业对标准的制定也越来越重视,行业的标准意识也越来越高。在皮革标准化工作人员和整个皮革行业的共同努力下,中国皮革检测方法标准已经有了长足的进步,特别是最近几年,标准化工作人员做了很多工作,加快了中国检测方法标准同国际标准的接轨速度,使检测方法标准的采标率有了很大提高。 从表中可以看出,中国皮革检测方法标准与国家标准还有一定差距,特别是随着皮革行业的发展,人们对皮革性能的要求不断发生变化,我们对检测方法标准的制定也要不断适应世界皮革行业发展的需求,加快对旧方法标准的修订和新方法标准的制定。 表2-3 中国皮革检测方法标准与国际同类标准的对比 序号 中国标准 ISO标准 简要说明 1、GB/T 4689.20-1996 皮革 涂层粘着牢度测定方法 ISO 11644 :2009 Leather — Test for adhesion of finish 等效采用 2、GB/T 4689.21-2008 皮革 吸水性测定方法 ISO 2417:2002 Leather — Physical and mechanical tests — Determination of the static absorption of water 等效采用 3、QB/T 2799-2006 皮革 透气性测定方法 无 透气性是皮革很重要的一项卫生性能要求。 4、GB/T 17928-1999 皮革 针孔撕裂强度测定方法 无 等效采用DIN 53331-1980 5、QB/T 1327-1991 皮革表面颜色摩擦牢度测试方法 无 参照采用JIS K 6547 - 1976 6、QB/T 1807-1993 有色皮革耐热牢度试验方法 无 等效采用英国皮革化学家协会标准SLF 2 7、QB/T 1808-1993 有色皮革耐水牢度试验方法 ISO 11642:2012 Leather — Tests for Colour Fastness — Colour Fastness to Water 等效采用英国皮革化学家协会标准SLF 8 8、QB/T 1809-1993 皮革伸展定型试验方法 无 等效采用英国皮革化学家协会标准SLP 11 9、QB/T 1810-1993 皮革耐冲击试验方法 无 等效采用英国皮革化学家协会标准SLP 16 10、QB/T 1811-1993 皮革透水汽性试验方法 ISO 14268:2012 Leather — Physical and mechanical tests — Determination of water vapour permeability 等效采用 11、QB/T 2706-2005 皮革 化学、物理、机械和色牢度试验 取样部位 ISO 2418:2002 Leather — Chemical, physical and mechanical and fastness tests — Sampling location 修改采用 12、QB/T 2707-2005 皮革 物理和机械试验 试样的准备和调节 ISO 2419:2012 Leather — Physical and mechanical tests — Sample preparation and conditioning 修改采用 13、QB/T 2708-2005 皮革 取样 批样的取样数量 ISO 2588:1985 Leather — Sampling — Number of items for a gross sample 修改采用 14、QB/T 2709-2005 皮革 物理和机械试验 厚度的测定 ISO 2589:2002 Leather — Physical and mechanical tests — Determination of thickness 修改采用 15、QB/T 2710-2005 皮革 物理和机械试验 抗张强度和伸长率的测定 ISO 3376:2011 Leather — Physical and mechanical tests — Determination of tensile strength and percentage extension 修改采用 16、QB/T 2711-2005 皮革 物理和机械试验 撕裂力的测定 第2部分:双边撕裂法 ISO 3377-2:2011 Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear 修改采用 17、QB/T 2712-2005 皮革 皮革 粒面强度和伸展高度的测定 球形崩裂试验 ISO 3379:1976 Leather — Determination of distension and strength of grain — Ball burst test 修改采用 18、QB/T 2713-2005 皮革 物理和机械试验 收缩温度的测定 ISO 3380:2002 Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 degrees 修改采用 19、QB/T 2714-2005 皮革 物理和机械试验 耐折牢度的测定 ISO 5402:2012 Leather — Determination of flex resistance 修改采用 20、QB/T 2715-2005 皮革 物理和机械试验 视密度的测定 ISO 2420:2002 Leather — Physical and mechanical tests — Determination of apparent density 修改采用 21、QB/T 2716-2005 皮革 化学试验样品的制备 ISO 4044:2008 Leather — Chemical tests — Preparation of chemical test samples 修改采用 22、QB/T 2717-2005 皮革 化学试验 挥发物的测定 ISO 4684:2005 Leather — Chemical tests — Determination of volatile matter 修改采用 23、QB/T 2718-2005 皮革 二氯甲烷萃取物的测定 ISO 4048:2008 Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty acid content 修改采用 24、QB/T 2719-2005 皮革 硫酸盐总灰分和硫酸盐水不溶物灰分的测定 ISO 4047:1977 Leather — Determination of sulphated total ash and sulphated water insoluble ash 修改采用 25、QB/T 2721-2005 皮革 水溶物、水溶无机物、水溶有机物的测定 ISO 4098:2006 Leather — Chemical tests — Determination of water-soluble matter,water soluble inorganic matter and water soluble organic matter 修改采用 26、QB/T 2722-2005 皮革 含氮量和“皮质”的测定 滴定法 ISO 5397:1984 Leather — Determination of nitrogen content and "hide substance" — Titrimetric method 修改采用 27、QB/T 2723-2005 皮革 鞣透度、革质及结合鞣质的计算 无 修改采用英国皮革化学家协会标准SLC 12 28、QB/T 2724-2005 皮革 pH的测定 ISO 4045:2008 Leather — Chemical tests — Determination of pH 修改采用 29、QB/T 2725-2005 皮革 颜色耐汗牢度测定方法 ISO 11641:2012 Leather — Tests for colour fastness — Colour fastness to perspiration 等效采用 30、QB/T 2726-2005 皮革 色牢度试验 往复式摩擦色牢度 ISO 11640:2012 Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing 等效采用 31、GB/T 19941-2005 皮革和毛皮 化学试验 甲醛含量的测定 ISO 17226-1:2008 Leather — Chemical determination of formaldehyde content — Part 1: Method using high performance liquid chromatography ISO 17226-2:2008 Leather — Chemical determination of formaldehyde content — Part 2: Method using colorimetric analysis 修改采用 32、GB/T 19942-2005 皮革和毛皮 化学试验 禁用偶氮染料的测定 ISO 17234-1:2010 Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colorants ISO 17234-2:2010 Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 2: Determination of 4-aminoazobenzene 修改采用 33、QB/T 2728-2005 皮革 物理和机械试验 雾化性能的测定 ISO 17071:2006 Leather — Physical and mechanical tests — Determination of fogging characteristics 修改采用 34、QB/T 2729-2005 皮革 物理和机械试验 水平燃烧性能的测定 ISO 17074:2006 Leather — Physical and mechanical tests — Determination of resistance to horizontal spread of flame 修改采用 35、QB/T 2726-2005 皮革 物理和机械试验 耐磨性能的测定 ISO 17076-1:2012 Leather — Determination of abrasion resistance — Part 1: Taber method ISO 17076-2:2012 Leather — Determination of abrasion resistance — Part 2: Martindale ball plate method
上海标检产品检测有限公司



  • [联系时请说明来自 检测通]
  • 联系方式:
  • 请点击查看电话

  • 地址:
  • 上海外高桥保税区华申路130号

  • 检测通手机版

  • 检测通官方微信

  •  检测通QQ群